销售咨询热线
15953126901
18615254757
行业动态 dongnews
企业案例 case

联系我们

  • 联系人:济南燕翔铁艺制品有限公司
  • 手机:15953126901
  • 电话:18615254757
  • 邮箱:785385551@qq.com
  • 地址:济南市天桥区历山北路黄台不锈钢市场9区904号
当前位置: 首页 > 新闻资讯>行业动态>铁艺大门焊接工艺和如何改进产品性能

铁艺大门焊接工艺和如何改进产品性能

来源:http://www.jnghbxg.com 日期:2020-06-11 发布人:yangxiang 浏览次数:
  门的种类有很多,材质也多种多样,用户可以根据自己的喜好,选择合适的铁艺门。为了让您对铸铁门有更多的了解,济南铁艺大门厂家对铸铁门的焊接工艺提高产品性能的方法进行了简单的介绍。我希望这对你有帮助。
  There are many kinds of doors and materials. Users can choose the right iron door according to their preferences. In order to let you know more about the cast iron door, Jinan iron gate factory introduces the welding process of the cast iron door to improve the product performance. I hope it helps you.
  济南铁艺大门焊接工艺:
  Jinan Iron Gate welding process:
  1. 机架焊接,根据机架尺寸在地面定位。把边界的边缘剪成45。对焊后的点焊。正确<箱体对角线应相等)焊接后牢固。
济南铁艺大门
  1. The frame shall be welded and positioned on the ground according to the frame size. Cut the edge of the border to 45. Spot welding after butt welding. Correct < the box diagonal shall be equal) it shall be firm after welding.
  2. 焊接中长竖管,每门3根长竖管,均匀分布在机架内,定位距离为339 mm。放置后点焊,然后调平,焊接前检查无误。
  2. Weld medium long vertical pipes, 3 long vertical pipes for each door, evenly distributed in the frame, with a positioning distance of 339mm. After placing, spot welding, then leveling, check before welding.
  4、夹紧在中间的长竹竿之间,放好位置,先点焊,再找平,检查无误后再焊接。
  4. Clamp between the long bamboo poles in the middle, put them in place, spot weld first, then level them, and weld them after checking.
  4、先点焊,再找平,检查无误后再焊接。
  4. First spot welding, then leveling, and then welding after checking.
  5、短横管焊接每门24条,按图纸位置。点焊后再找平,焊接前检查是否正确。为了防止焊接变形,可要求进行隔离焊。由于顺序混乱,焊点较多,焊接时应在无漏焊件后进行检查。
  5. 24 short horizontal pipes shall be welded for each door according to the drawing position. Level after spot welding and check whether it is correct before welding. In order to prevent welding deformation, isolation welding can be required. Due to the disordered sequence and many welding spots, the inspection shall be carried out after there is no missing weldment during welding.
  提高济南铁艺大门性能的方法:
  Methods to improve the performance of Jinan Iron Gate:
  保持清洁:铁门始终保持清洁,除尘材料需用纯棉编织。对于压纹装饰中的凹痕和污垢,建议使用柔软的羊毛而不是硬布。
  Keep clean: the iron door is always clean, and the dust removal materials need to be woven with pure cotton. For dents and dirt in embossing, it is recommended to use soft wool instead of hard cloth.
  切勿接触酸碱:可以说,铁艺门的敌人是“酸碱”物质,每当遇到酸碱,如醋、肥皂水、苏打水等,需立即冲洗干净,然后用干棉布擦干。如果这些物质在表面停留时间过长,熟铁闸门的光泽会大大降低。
  Do not touch acid and alkali: it can be said that the enemy of tieyimen is the "acid and alkali" substance. Whenever encountering acid and alkali, such as vinegar, soapy water, soda water, etc., it is necessary to wash them immediately and then dry them with dry cotton cloth. If these materials stay on the surface for a long time, the luster of the wrought iron gate will be greatly reduced.
  保持干燥:众所周知,湿润会使金属生锈,并缩短使用时间。因此,可以在通风处安装铁艺门,使用寿命也长。
  Keep dry: it is well known that wetting will rust the metal and shorten the use time. Therefore, the iron door can be installed in the ventilation place, and the service life is long.
  及时除锈:铁一闸门长锈时,对于一些小锈、浅锈,可以用粘稠的棉花油进行涂抹,停留一段时间后,可以用抹布擦拭。
  Timely rust removal: when the iron gate has long rust, for some small rust and light rust, it can be coated with viscous cotton oil, and after a period of time, it can be wiped with a rag.
  以上就是济南铁艺大门厂家介绍的铝门焊接工艺及提高产品性能的相关介绍,如果您对以上内容有疑问,可以打电话咨询,我们为您提供更详细的回答。
  The above is the introduction of aluminum door welding process and product performance improvement introduced by Jinan Iron Gate manufacturer. If you have any questions about the above content, you can call for consultation, and we will provide you with more detailed answers.