There are various types of iron doors. Different styles, solemn and luxurious. You can also choose the color you like. Some users will worry about rust on the surface, but there is no need to worry about it. Let's take a look at the door treatment process, and you will know that the door is durable and rusty:

　　一、过程中，多是焊渣铁门焊接部位，一定要小心焊渣的各个焊接部位。先用平锉或扁铁去打渣，然后用砂轮机和砂布去磨焊缝，使其光滑。飞溅到其他部位的焊渣要顺势清理干净。

　　1、 In the removal process, the welding parts of the slag iron gate are mostly removed, and each welding part of the slag must be carefully removed. First use flat file or flat iron to make slag, and then use grinder and abrasive cloth to grind the weld to make it smooth. The welding slag splashed to other parts shall be cleaned along with the situation.

　　二. 在补强过程中，用腻子和固化剂(比例为50:1)涂上腻子，搅拌均匀，涂在焊接部位，处理焊缝缺陷。

　　2、 In the process of reinforcement, putty and curing agent (proportion: 50:1) shall be applied, stirred evenly, applied to the welding parts, and weld defects shall be handled.

　　三、上光过程中，上光腻子晾干后，用抛光机和砂布充分打磨门的各个部件，特别是涂抹腻子的部分更要打磨。

　　3、 In the polishing process, after the putty is dried, use a polishing machine and abrasive cloth to fully polish all parts of the door, especially the part coated with putty.

　　四、喷涂过程中，铁艺门在喷漆前，用湿布充分擦拭门的各个部位，不能留下灰尘等。然后先给铁艺门喷铁锈漆，等干了再喷，等干了再喷，等干了漆膜后再喷三遍自己喜欢的漆，喷上清漆。注意应无泄漏区，也不能产生流动等缺陷。个别精细处可刷涂补漆。

　　4、 In the process of spraying, before spraying the iron door, wipe all parts of the door with a wet cloth, without leaving dust, etc. Then spray the rust paint on the iron door first, wait until it's dry, wait until it's dry, wait until the paint film is dry, then spray the paint you like three times, and finally spray the varnish. Pay attention that there should be no leakage area and flow defects. Touch up paint can be applied to some fine parts.

　　以上就是对济南铁艺大门表面处理技术的详细介绍，想要了解更多请点击官网http://www.jnghbxg.com

　　The above is a detailed introduction to the surface treatment technology of Jinan iron gate. For more information, please click http://www.jnghbxg.com