随着社会经济的发展，我们对于各种装修材料的需求也在日益增加，铁艺大门的古朴典雅，让它越发的受欢迎，下面济南铁艺大门厂家就带大家来具体了解一下别墅铁艺大门的焊接工艺。

With the development of society and economy, our demand for various decoration materials is also increasing. The simplicity and elegance of the iron gate make it more and more popular. Below, the Jinan iron gate manufacturer will take you to learn more about the welding process of the villa iron gate.

1、别墅铁艺大门边框焊接：框架焊接应根据别墅铁艺大门的框架尺寸定位在地面上。将框架材料两端的宽边切成45度再进行焊接。

1. Welding of villa iron gate frame: The frame welding should be positioned on the ground according to the frame size of the villa iron gate. Cut the wide edges at both ends of the frame material into 45 degrees before welding.

2、每扇别墅铁艺大门中间要焊接3根长立管，均匀分布在框架内，定位距离为339mm，定位后先点焊，然后找平待检查正确后再焊接牢固。

2. Three long vertical pipes should be welded in the middle of each villa's iron gate, evenly distributed within the frame, with a positioning distance of 339mm. After positioning, spot welding should be carried out first, and then leveling should be carried out to ensure proper inspection before welding is firm.

3、别墅铁艺大门用横管焊上四根矛头，摆好位置，先点焊，再找平，检查无误后再进行满焊。

3. The iron gate of the villa is welded with four spear heads using a horizontal pipe, placed in position, spot welded first, leveled again, and fully welded after inspection.

4、每扇别墅铁艺大门焊接时，会根据图纸来进行位置排列，为了防止别墅铁艺大门焊接的时候变形，会要求隔离焊接。因为材料使用较多，会存在焊点，所以焊接好了之后，各个焊点位置应该打磨打磨，不让它太突兀。

4. When welding each villa iron gate, the position will be arranged according to the drawings. In order to prevent deformation during welding of the villa iron gate, isolation welding will be required. Due to the frequent use of materials, there may be solder joints. Therefore, after welding, each solder joint position should be polished and polished to avoid being too abrupt.

5、别墅铁艺大门上方的枪头焊接，也是在上下相应的位置，依次焊接每个枪头，先让枪头垂直于横杆，正面朝前且不扭曲，点焊慢慢调整，调整无误后，先满焊到框架上，然后整体再检查一遍，然后焊牢。

5. The welding of the gun heads above the iron gate of the villa is also carried out at the corresponding positions up and down. Each gun head is welded in sequence, with the gun head perpendicular to the crossbar and facing forward without distortion. The spot welding is slowly adjusted, and after the adjustment is correct, it is fully welded to the frame first. Then, the overall inspection is conducted again, and then the welding is firmly welded.

以上就是济南铁艺大门厂家为大家带来的全部内容，希望能够帮助到大家，若大家有需要或者有其他想要了解的内容，欢迎留言咨询我们http://www.jnghbxg.com

The above is all the content that Jinan Iron Art Gate manufacturer has brought to you. We hope it can help you. If you have any needs or other information you would like to know, please feel free to leave a message and consult us http://www.jnghbxg.com